www.hdpe-fittings.com
HDPE Molded Butt and Socket Fittings
Butt Fusion Molded Fittings
Tees- 3/4"
to 12"
90 Degree
Elbow-3/4" to 12"
45 Degree
Elbow- 3/4" to 12"
Reducer-_3/4"
to 12"
End Caps-
3/4" to 12"
Flange
Adapters- 3/4" to 12"
Socket Fusion Molded Fittings
Tees-3/4"
to 4"
90
Degree Elbow- 1" to 4"
45
Degree Elbow- 2" to 4"
End
Cap-1/2" to 4"
45
Degree Lateral Wye-1 1/2 to 6" (SDR 36.5 only)
Specifications
Molded Butt
Fittings-All molded
fittings are designed to be fully pressure rated to the equivalent SDR
in HDPE pipe.
Molded butt fusion fittings are manufactured in compliance with ASTM D3261 (Standard Specifications For Butt Fusion Polyethylene Fittings). Measurement is done in accordance with ASTM D2122.
Our molded butt fittings fully comply with the requirements of ASTM D2513 and API 15LE. Molded butt fusion fittings are molded from pre-blended virgin resins in accordance with the material specifications listed in ASTM D1248.
Molded Socket
Fittings-Molded
socket fusion fittings are designed with a wall thickness sufficient to
qualify as a SDR 7 and exceed the maximum requirements for SDR HDPE pipe.
Molded socket fusion fittings are manufactured in compliance with ASTM D2683 (Standard Specifications For Socket Type Polyethylene Fittings). Measurement is done in accordance with ASTM D2122. Our socket fusion fittings fully comply with ASTM D2513 and APE 15LE.